Basic functionality

There are 4 possible programs added to the InDiCo from standard:

Simple on - 24V - As 24V input goes high:
- Set an output to level between 0-10

Simple on - IHC - As IHC input goes high:
- Set an output to level between 0-10

Timed on - 24V input goes high:
- Set an output to level 0-10
- After 0-120 minutes, set an output to level 0-10

Timed on - IHC input goes high:
- Set an output to level 0-10
- After 0-120 minutes, set an output to level 0-10



fym's picture

I have chosen to not include the long press functionality.

But one backer told me: "this is in my opinion vital, and something I use daily on all my other IHC dimmers".

I will look into this, and see how I can convince my code to handle this

fym's picture

From a backer:

My preferred functions would be the following (where I'm assuming you have two buttons available for each analog output):
- On long press input A, adjust level up/down (Turn on, if it's off according to the short press below). When released save level A in device.
- On long press input B, adjust level up/down (Turn on, if it's off according to the short press below). When released save level B in device.
- On short press input A, turn on analog out with saved level A. If already on, turn off. If already on level B, fade to level A.
- On short press input B, turn on analog out with saved level B. If already on, turn off. If already on level A, fade to level B.